yes i did, I have the actiontec mi424wr router,
This is what i forwarded it to, and i selected Any port
the same with port triggering
| Rune Central http://runequake.com/forums/ |
|
| trying to set up a runequake sever from home connection http://runequake.com/forums/viewtopic.php?f=2&t=1584 |
Page 1 of 1 |
| Author: | Meatwad [ Mon Feb 07, 2011 12:01 pm ] |
| Post subject: | trying to set up a runequake sever from home connection |
Hello, i'm trying to set up a runequake server from my home connection, but I seem to be having trouble connecting through the dns that I got from dyndns.org. But can connect through my internal ip address. I even tried port forwarding, but I doesn't want to work. I have verizon fios if that helps. |
|
| Author: | Baker [ Tue Feb 08, 2011 12:56 am ] |
| Post subject: | Re: trying to set up a runequake sever from home connection |
Forward all UDP ports to the appropriate local ip address on your router. |
|
| Author: | Meatwad [ Tue Feb 08, 2011 10:58 am ] |
| Post subject: | Re: trying to set up a runequake sever from home connection |
I have tried the udp port forwarding, I says It connected, but times out. my dyndns is quakerune.dyndns.org. |
|
| Author: | Baker [ Tue Feb 08, 2011 8:52 pm ] |
| Post subject: | Re: trying to set up a runequake sever from home connection |
Did you forward every single UDP port or just 26000? You have to forward ALL of them. Quake doesn't use a single port. |
|
| Author: | Meatwad [ Tue Feb 08, 2011 9:38 pm ] |
| Post subject: | Re: trying to set up a runequake sever from home connection |
yes i did, I have the actiontec mi424wr router, This is what i forwarded it to, and i selected Any port the same with port triggering
|
|
| Author: | Slot Zero [ Tue Feb 08, 2011 10:22 pm ] |
| Post subject: | Re: trying to set up a runequake sever from home connection |
Another alternative you could try is setting the DMZ Host to the IP address of the quake server. This should force all incoming packets, except those specifically configured, to that one IP. |
|
| Author: | Meatwad [ Wed Feb 09, 2011 8:42 pm ] |
| Post subject: | Re: trying to set up a runequake sever from home connection |
I have tried that, it goes to the connection accepted, then times out after 10 seconds, but doesn't get to the game. |
|
| Author: | Meatwad [ Fri Feb 25, 2011 1:32 pm ] |
| Post subject: | Re: trying to set up a runequake sever from home connection |
I finally got it to Work, and I just added it to the server list. All i needed to do is change routers. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|